AEROSOL SILICONE LUBRICANTS
AEROSOL ADHESIVES
AEROSOL RELEASE AGENTS
AEROSOL CLEANERS
AEROSOL DEGREASERS
CARB  - OTC - CFC's

AEROSOL SILICONE LUBRICANTS

 

Camie
Product		 Characteristics Features Use on
Plastic or
Painted
Surfaces		 Spray
Pattern		 Odor Silicone
Content		 NSF
Status		 Complies
With
FDA
Regulations
100 Heavy-Duty
Lubricant		 Long Lasting
Won't Wear Off		 Yes
Test		 Heavy
Mist-Wet		 Mild 6% N/A Yes*
410 Food Grade
Lubricant		 Dry Spray
Universal Product		 Yes
Test		 Dry Mist Mild 5% Authorized
H1		 Yes**
610 Economy Lubricant Economical Yes
Test		 Mist Mild 5% Authorized
H2		 Yes*
666 Food Grade Heavy-Duty
Lubricant		 Heavy Grease-Type
Useful on Overhead or
Vertical Surfaces		 Yes
Test		 Heavy
Mist		 Mild 6% Authorized
H1		 Yes*
710 Economy Food Grade Lubricant Economical Yes
Test		 Mist Mild 3% Authorized
H1		 Yes*
888 Mold
Release/Light-
Duty Lubricant		 Dry Spray
Should be Used
as Mold Release		 Yes
Test		 Dry
Mist		 Mild 3% N/A Yes*
999 General Purpose
Lubricant		 Dry Spray
Universal Product		 Yes
Test		 Dry
Mist		 Mild 4% Authorized
H2		 Yes*

Note:  In 1996 USDA discontinued their program of approving non-food compounds.  NSF International created the NSF Non-food Compounds Registration Program as a continuation of the USDA product approval and listing program, which is based on meeting regulatory requirements including FDA 21 CFR for appropriate use, ingredients and labeling.  They continue to use the same criteria and rating system as USDA did.  H1 lubricants may be used as a lubricant with incidental food contact for use in official establishments operating under the Federal meat and Poultry Inspection Program.  H2 lubricants may be used as a lubricant, release agent, or anti-rust film on equipment and machine parts or in closed systems in locations in which there is no possibility of the lubricant or lubricated part contacting edible products.

*   Active ingredients comply with 21 CFR 178.3570 lubricants with incidental food contact.   Allow solvent
     to evaporate prior to possible food contact.
**  Both active ingredients and solvent comply with 21 CFR 178.3570 lubricants with incidental food contact.

 HOW TO SELECT A SILICONE LUBRICANT
Does it need to be...
Heavy Duty Wet Dry Used on Plastic
or Painted Surfaces
100 100 - 100
- - 410 410
- - 610 610
666 666 - 666
- - 710 710
- - 888 888
All Aerosol Products are Packaged
and Priced 12 Cans Per Case.		 Many Camie-Campbell products are available in bulk containers.  Call for further information. - - 999 999

No ozone depleting chemicals are used in the formulation of Camie products.

AEROSOL ADHESIVES

 

Camie Product

 Common
Uses		 Net
Wt.		 Type
Bond		 Color Spray
Pattern		 **
Maximum
Service
Temp.		 **
One
Surface
Bond @
Room
Temp.		 **
Two
Surface
Bond @
Room
Temp.		 3M
Product		 Features 3-Way
Valve
300* General
Purpose
Mist		 17 Temporary
or
Permanent		 Light Amber Conical
or
Fan Mist		 120ºF 30 Sec.
to
5 Min.		 15 Sec.
to
5 Min.		 3M
Industrial
Spray
Adhesive		 Good
Coverage
Economical		 No
303* Foam & Fabric Bonding 17 Temporary
or
Permanent		 Orange Web Spray 130ºF 7 Sec.
to
2 Hrs.		 7 Sec.
to
2 Hrs.		 74 Soft Glue Line
Easy to See		 No
313*
 		 Foam & Fabric Bonding 12 Permanent Translucent Web Spray 130ºF 7 Sec.
to
2 Hrs.		 10 Sec.
to
5 Min.		 74 Fastest Tack
Soft
Glue Line		 No
343* Construction 17 Temporary
or
Permanent		 Tinted Blue Web Spray 130ºF 15 Sec.
to
2 Hrs.		 15 Sec.
to
2 Hrs.		 72 General Purpose,
Fast Tack,
High Strength		 No
363* General Purpose Web 17 Temporary
or
Permanent		 Translucent Web Spray 130ºF 15 Sec.
to
2 Hrs.		 15 Sec.
to
2 Hrs.		 76 Fast Tack
High Strength
General Purpose		 No
365* Contact Type,
High Strength		 16 Permanent Translucent Web
Adjustable		 140º+F Not Recommended 1 Min.
to
20 Min.		 90 High Strength
High Temp.
Water Resistant		 Yes
373* Labeling, Etc.,
High Performance		 16.25 Temporary
or
Permanent		 Water White Conical Mist 120ºF 7 Sec.
to
5 Min.		 7 Sec.
to
5 Min.		 77 Pressure Sensitive
Colorless		 No
393* Headliner, Trim & Laminating 16.5 Permanent Water White Web
Adjustable		 160ºF Not Recommended 45 Sec.
to
15 Min.		 90 Headliner 8088, 80 8090 High Strength
High Temp.
Water Resistant		 Yes

NOTE:  Testing of adhesive on substrate(s) for compatibility is recommended before use.
** These results were obtained under controlled laboratory conditions at Camie-Campbell.  Inasmuch as Camie-Campbell, Inc. has no control over the use to which others may put the material, it does not guarantee that the same results described herein will be obtained.  Each user should make their own tests to determine the material's suitability for their own particular use.

No ozone depleting chemicals are used in the formulation of Camie products. 


AEROSOL RELEASE AGENTS

 

Camie
Product		 Features Active
Ingredient		 Paintable Substrates
to be
Released

Active Ingredients Comply with FDA Regulations for Incidental Food Contact

 NSF**
Registered
100 Heavy
Duty		 Silicone No Rubber, TPR
Urethane		 Yes N/A
610 General Purpose
Dry Spray		 Silicone No All Thermo Plastics Yes H2
888 Fast Evaporating
Short Cycle Time		 Silicone No All Thermo Plastics Yes N/A
980 Heavy
Wet Spray		 Silicone Fluid/Resin Blend No Rigid Urethanes, Epoxies, TPR, Thermosets No N/A
999 Dry Fine Mist Silicone No All Thermo Plastics Yes H2
A1000 Dry Powder PTFE Yes Rubber, TPR, Nylon, Epoxy, Phenolics, Thermosets No N/A
1080 Fast Evaporating General Purpose Recognized under the Component Recognition Program of Underwriters Laboratories Inc. Paintable Silicone Yes All Thermo Plastics No N/A
1380 Fast Drying Paintable Lecithin Yes All Thermo Plastics Yes N/A
1480 Fast Evaporating Paintable Paintable Silicone Yes All Thermo Plastics No N/A
1680 Economy Silicone No All Thermo Plastics Yes N/A
1780 Economy Paintable Silicone Yes All Thermo Plastics No N/A
1880 Economy Paintable Lecithin Yes All Thermo Plastics Yes N/A
22/50 Solvent Cleaner & Degreaser*
Jet Spray Valve, Safely Removes Dirt from Electrical Components While in Service, For Cold Degreasing		 22/90 Heavy Duty Cleaner & Degreaser*
For Heavy Duty Cleaning and Degreasing of Molds

 

 3015 Mold Saver
Mold Saver, Fights Oxidation, Neutralizes Corrosive Deposits, Displaces Moisture, Protects Molds During Shutdown, Lubricates

AEROSOL CLEANERS AND DEGREASERS

 

Camie
Product		 Common
Use		 Use on
Plastic or
Painted
Surfaces 		Odor Flammability
for Aerosol

Comments
20/20 Glass Cleaner and
Light-Duty Hard
Surface Cleaner		 Yes Mild
Pleasant		 Contents
Under
Pressure		 Excellent All-Purpose Light-Duty Hard Surface Cleaner
22/50* Heavy-Duty
Solvent Cleaner
and Degreaser		 No Sharp Contents
Under
Pressure		 Nonflammable, Rapid Drying, All Purpose Cleaner/Degreaser Leaves No Residue
22/60* Contact
Cleaner		 Yes
Test		 Mild Extremely
Flammable		 Rapid Drying Contact Cleaner Leaves No Residue
22/80 Citrus
Cleaner		 Test Mild
Citrus		 Extremely
Flammable		 Citrus Cleaner/Degreaser.   Leaves No Residue
22/90* Heavy-Duty
Cleaner/Degreaser		 No Sharp Extremely
Flammable		  Rapid Drying, All-Purpose, Heavy-Duty Cleaner/Degreaser Leaves No Residue

 

No ozone depleting chemicals are used in the formulation of Camie products. 

* The California Air Resources Board (CARB) has established new lower levels of Volatile Organic Compounds (VOC) and banned the use of some solvents for certain categories of aerosol products.  This product DOES NOT comply with the new CARB regulation and is not offered for sale in the State of California.  For CA  RB compliant products, please ask to see the new Shelby® product line.

                                                          OTC Compliant Products!!!!
There are new lower VOC limits for a wide variety of products which are going into effect in the northeastern United States January 1, 2005.  Camie-Campbell is prepared to maintain uninterrupted compliance so that this regulatory change will be seamless for our customers.  All Camie aerosol products manufactured after 1/1/05 will comply with the lower VOC requirements. 
The OTC (Ozone Transport Commission) is made up of the following 13 states:  Connecticut, Delaware, District of Columbia, Maine, Maryland, Massachusetts, New Hampshire, New Jersey, New York, Pennsylvania, Rhode Island, Vermont and Virginia.  At present, four of these states have adopted the OTC model VOC rule and the rest are anticipated to do so by the end of 2004.

PDC Home Page    Packaging Products Listing    Packaging Equipment Listing     System Integration    Parts & Service    Contact Us