print page close window

Shanklin® Hy-Speed Model Specifications
  Model HS-1 Model HS-2 Model HS-3 Model HS-4
Package Size Min. 1/2"W x 1/8"H x 3"L
Max. 16"W x 6"H x 60"L
Optional 8" height
Width + height combination cannot exceed max. film width		 Min. 2"W x 3/8"H x 3"L
Max. 16"W x 6"H x 60"L
Optional 8" height
Width + height combination cannot exceed max. film width		 Min. 1/2"W x 1/8"H x 2"L
Max. 16"W x 3"H x 15"L
Optional 5" height
Width + height combination cannot exceed max. film width		 Min. 2"W x 3/8"H x 2"L
Max. 16"W x 3"H x 15"L
Optional 5" height
Width + height combination cannot exceed max. film width
Maximum Film Width 22" folded or 44" flat; centerfolder required for flat film 40" flat 22" folded or 44" flat; centerfolder required for flat film 40" flat
Conveyor Height 35 1/2" without casters; 41 1/2" with casters
Package Speeds 100 packages/min. maximum; dependent on product and application 180 packages/min. maximum; dependent on product and application
Film Speeds 120 linear ft./min. maximum 200 linear ft./min. maximum
Longitudinal Seal Weld bead at side of packages Static seal; optional thermal seal Weld bead at side of packages Static seal; optional thermal seal
Transverse Seal SmartWire or hot knife jaws standard; jaws for polyethylene available
Main Drive 1 hp DC motor with SCR variable speed control 1 1/2 hp DC motor with SCR variable speed control
Power 230V, 15A, 60Hz, 1 phase
Compressed Air 1/2 C.F.M. free air at 60 psi
Safety Devices
  • Emergency stop button instantly stops all machine functions until manually reset
  • Multiple safety interlocks
  • Emergency reverse
  • Air cylinder safety opens end seal jaws
  • Torque limiters on main drive and infeed conveyor
  • Low voltage sensors and actuators
  • Tamper-resistant controls